[PATCH 07/24] arm64: dts: qcom: msm8976: Use the header with DSI phy clock IDs

[Krzysztof Kozlowski]

Use the header with DSI phy clock IDs to make code more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Depends on:
https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index d036f31dfdca162debe18ed6ed9a7767a34aced6..e2ac2fd6882fcf47e846a92d45e0fcb9beba633a 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8976.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -824,10 +825,10 @@ gcc: clock-controller@1800000 {
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -970,8 +971,8 @@ mdss_dsi0: dsi@1a94000 {
 
 				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
 						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 
@@ -1046,8 +1047,8 @@ mdss_dsi1: dsi@1a96000 {
 
 				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
 						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi1_phy>;
 

-- 
2.43.0