[PATCH 12/24] arm64: dts: qcom: sc8180x: Use the header with DSI phy clock IDs

[Krzysztof Kozlowski]

Use the header with DSI phy clock IDs to make code more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Depends on:
https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 28693a3bfc7fefd883a7dee69a406235317c3047..547bf2a0249fef88d0778a5390cfda76a9d7e4f1 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -3465,10 +3466,10 @@ dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc8180x-dispcc";
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&edp_phy 0>,

-- 
2.43.0