[PATCH 16/24] arm64: dts: qcom: sm6115: Use the header with DSI phy clock IDs

[Krzysztof Kozlowski]

Use the header with DSI phy clock IDs to make code more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Depends on:
https://lore.kernel.org/all/20250127132105.107138-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 94c081bf7a892654e684ad806621a14dfd4407ab..55a0db0ed9cbfa2560e94ca8160a31ff3f1efc25 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Iskren Chernev <iskren.chernev@xxxxxxxxx>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -1960,7 +1961,8 @@ mdss_dsi0: dsi@5e94000 {
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
@@ -2034,8 +2036,8 @@ dispcc: clock-controller@5f00000 {
 			reg = <0x0 0x05f00000 0 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;

-- 
2.43.0