Re: [PATCH 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424

[Konrad Dybcio]

On 27.01.2025 10:31 AM, Sricharan R wrote:
> From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> 
> IPQ5424 have different OPPs available for the CPU based on
> SoC variant. This can be determined through use of an eFuse
> register present in the silicon.
> 
> Added support for ipq5424 on nvmem driver which helps to
> determine OPPs at runtime based on the eFuse register which
> has the CPU frequency limits. opp-supported-hw dt binding
> can be used to indicate the available OPPs for each limit.
> 
> nvmem driver also creates the "cpufreq-dt" platform_device after
> passing the version matching data to the OPP framework so that the
> cpufreq-dt handles the actual cpufreq implementation.
> 
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
>  drivers/cpufreq/qcom-cpufreq-nvmem.c | 5 +++++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 9c198bd4f7e9..4045bc3ce805 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -187,6 +187,7 @@ static const struct of_device_id blocklist[] __initconst = {
>  	{ .compatible = "ti,am62p5", },
>  
>  	{ .compatible = "qcom,ipq5332", },
> +	{ .compatible = "qcom,ipq5424", },
>  	{ .compatible = "qcom,ipq6018", },
>  	{ .compatible = "qcom,ipq8064", },
>  	{ .compatible = "qcom,ipq8074", },
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 3a8ed723a23e..102f7f1b031c 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -200,6 +200,10 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>  	case QCOM_ID_IPQ9574:
>  		drv->versions = 1 << (unsigned int)(*speedbin);
>  		break;
> +	case QCOM_ID_IPQ5424:
> +	case QCOM_ID_IPQ5404:
> +		drv->versions =  (*speedbin != 0x3b) ? BIT(0) : BIT(1);

Perhaps:

drv->versions =  (*speedbin == 0x3b) ? BIT(1) : BIT(0);

But ultimately both work:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad