[PATCH v2 2/3] RFC: regulator: ad5398: Change selector division calculation

[Isaac Scott]

If the AD5398 is defined to have a current limit with no range, i.e.
when max_Ua and min_Ua are equal, the DIV_ROUND_UP erroneously tries to
set the current to a higher level than the max_Ua, which causes the
driver to fail to set the current. Fix this so the driver slightly
underestimates the current to set.

Signed-off-by: Isaac Scott <isaac.scott@xxxxxxxxxxxxxxxx>
---
 drivers/regulator/ad5398.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index e6f45c6e750c..0c60ecd1f0f2 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -98,8 +98,7 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int
 	if (min_uA > chip->max_uA || max_uA < chip->min_uA)
 		return -EINVAL;
 
-	selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level,
-				range_uA);
+	selector = ((min_uA - chip->min_uA) * chip->current_level / range_uA);
 	if (ad5398_calc_current(chip, selector) > max_uA)
 		return -EINVAL;
 
-- 
2.43.0