Re: [PATCH] usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
From: John Keeping
Date: Wed Jan 29 2025 - 12:32:01 EST
On Wed, Jan 29, 2025 at 05:40:04PM +0100, Takashi Iwai wrote:
> On Wed, 29 Jan 2025 17:05:19 +0100,
> John Keeping wrote:
> >
> > In the two loops before setting the MIDIStreaming descriptors,
> > ms_in_desc.baAssocJackID[] has entries written for "in_ports" values and
> > ms_out_desc.baAssocJackID[] has entries written for "out_ports" values.
> > But the counts and lengths are set the other way round in the
> > descriptors.
> >
> > Fix the descriptors so that the bNumEmbMIDIJack values and the
> > descriptor lengths match the number of entries populated in the trailing
> > arrays.
>
> Are you sure that it's a correct change?
>
> IIUC, the in_ports and out_ports parameters are for external IN and
> OUT jacks, where an external OUT jack is connected to an embedded IN
> jack, and an external IN jack is connected to an embedded OUT jack.
I think it depends how the in_ports and out_ports values in configfs are
interpreted. However, the case where in_ports != out_ports has been
broken since these files were added!
Without this change, setting in_ports=4 out_ports=2 we end up with:
Endpoint Descriptor:
[...]
bEndpointAddress 0x01 EP 1 OUT
[...]
MIDIStreaming Endpoint Descriptor:
bLength 8
bDescriptorType 37
bDescriptorSubtype 1 (Invalid)
bNumEmbMIDIJack 4
baAssocJackID( 0) 9
baAssocJackID( 1) 11
baAssocJackID( 2) 9
baAssocJackID( 3) 0
Endpoint Descriptor:
[...]
bEndpointAddress 0x81 EP 1 IN
[...]
MIDIStreaming Endpoint Descriptor:
bLength 6
bDescriptorType 37
bDescriptorSubtype 1 (Invalid)
bNumEmbMIDIJack 2
baAssocJackID( 0) 2
baAssocJackID( 1) 4
Note that baAssocJackID values 2 and 3 on the OUT endpoint are wrong.
>From the same config, the jack definitions are:
1: IN External
2: OUT Embedded, source 1
3: IN External
4: OUT Embedded, source 3
5: IN External
6: OUT Embedded, source 5
7: IN External
8: OUT Embedded, source 7
9: IN Embedded
10: OUT External, source 9
11: IN Embedded
12: OUT External, source 11
So it seems that the first 2 entries in each endpoint list are correct.
For the OUT endpoint, jacks 9 and 11 are embedded IN jacks and for the
IN endpoint, jacks 2 and 4 are embedded OUT jacks.
The problem is that the OUT endpoint lists two extra invalid jack IDs
and the IN endpoint should list jacks 6 and 8 but does not.
After applying this patch, the endpoint descriptors for the same config
are:
Endpoint Descriptor:
[...]
bEndpointAddress 0x01 EP 1 OUT
[...]
MIDIStreaming Endpoint Descriptor:
bLength 6
bDescriptorType 37
bDescriptorSubtype 1 (Invalid)
bNumEmbMIDIJack 2
baAssocJackID( 0) 9
baAssocJackID( 1) 11
Endpoint Descriptor:
[...]
bEndpointAddress 0x81 EP 1 IN
[...]
MIDIStreaming Endpoint Descriptor:
bLength 8
bDescriptorType 37
bDescriptorSubtype 1 (Invalid)
bNumEmbMIDIJack 4
baAssocJackID( 0) 2
baAssocJackID( 1) 4
baAssocJackID( 2) 6
baAssocJackID( 3) 8
Which lists all the jack IDs where they should be.
Regards,
John
> > Cc: stable@xxxxxxxxxxxxxxx
> > Fixes: c8933c3f79568 ("USB: gadget: f_midi: allow a dynamic number of input and output ports")
> > Signed-off-by: John Keeping <jkeeping@xxxxxxxxxxxxxxxxx>
> > ---
> > drivers/usb/gadget/function/f_midi.c | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
> > index 837fcdfa3840f..6cc3d86cb4774 100644
> > --- a/drivers/usb/gadget/function/f_midi.c
> > +++ b/drivers/usb/gadget/function/f_midi.c
> > @@ -1000,11 +1000,11 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f)
> > }
> >
> > /* configure the endpoint descriptors ... */
> > - ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
> > - ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
> > + ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
> > + ms_out_desc.bNumEmbMIDIJack = midi->out_ports;
> >
> > - ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
> > - ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
> > + ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
> > + ms_in_desc.bNumEmbMIDIJack = midi->in_ports;
> >
> > /* ... and add them to the list */
> > endpoint_descriptor_index = i;
> > --
> > 2.48.1
> >
> >