[PATCH v5 2/4] dt-bindings: mfd: Add MDIO interface to rtl9301-switch

From: Chris Packham
Date: Thu Jan 30 2025 - 20:03:08 EST


The MDIO controller is part of the switch on the RTL9300 family of
devices. Add a $ref to the mfd binding for these devices.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---

Notes:
This patch is dependent on "dt-bindings: net: Add Realtek MDIO
controller" which adds the realtek,rtl9301-mdio.yaml binding.

Changes in v5:
- Note dependency on realtek,rtl9301-mdio.yaml patch
- Add back reg property to the mdio-controller node.
Changes in v4:
- There is a single MDIO controller that has MDIO buses as children
Changes in v3:
- None
Changes in v2:
- None

.../bindings/mfd/realtek,rtl9301-switch.yaml | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
index f053303ab1e6..89e10213a4ee 100644
--- a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
+++ b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
@@ -28,6 +28,9 @@ properties:
reg:
maxItems: 1

+ mdio-controller:
+ $ref: /schemas/net/realtek,rtl9301-mdio.yaml#
+
'#address-cells':
const: 1

@@ -41,6 +44,10 @@ patternProperties:
'i2c@[0-9a-f]+$':
$ref: /schemas/i2c/realtek,rtl9301-i2c.yaml#

+ 'mdio-controller@[0-9a-f]+$':
+ $ref: /schemas/net/realtek,rtl9301-mdio.yaml#
+
+
required:
- compatible
- reg
@@ -110,5 +117,27 @@ examples:
};
};
};
+
+ mdio-controller@ca00 {
+ compatible = "realtek,rtl9301-mdio";
+ reg = <0xca00 0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-bus@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ reg = <0>;
+ realtek,port = <1>;
+ };
+ ethernet-phy@1 {
+ reg = <1>;
+ realtek,port = <0>;
+ };
+ };
+ };
};

--
2.48.1