[PATCH v3 0/4] Add support for Priva E-Measuringbox board

[Oleksij Rempel]

This patch series introduces support for the Priva E-Measuringbox board
based on the ST STM32MP133 SoC. The set includes all the necessary
changes for device tree bindings, vendor prefixes, thermal support, and
board-specific devicetree to pass devicetree validation and checkpatch
tests.

changes v2:
- drop: dt-bindings: net: Add TI DP83TD510 10BaseT1L PHY

Oleksij Rempel (2):
  dt-bindings: vendor-prefixes: Add prefix for Priva
  dt-bindings: arm: stm32: Add Priva E-Measuringbox board

Roan van Dijk (2):
  arm: dts: stm32: Add thermal support for STM32MP131
  arm: dts: stm32: Add Priva E-Measuringbox devicetree

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/st/Makefile                 |   1 +
 arch/arm/boot/dts/st/stm32mp131.dtsi          |  35 ++
 arch/arm/boot/dts/st/stm32mp133c-prihmb.dts   | 496 ++++++++++++++++++
 5 files changed, 540 insertions(+)
 create mode 100644 arch/arm/boot/dts/st/stm32mp133c-prihmb.dts

--
2.39.5