[PATCH v4 4/4] arm64: dts: qcom: sm8650: drop remaining polling-delay-passive properties

[Neil Armstrong]

Remove the remaining polling-delay-passive properties from
thermal nodes without a passive trip point.

Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 24070d99b6f097f38e618330414b5a04734e7e32..fbceb66969156052467473e7bf637c762df03147 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -5946,8 +5946,6 @@ cpu1-critical {
 		};
 
 		nsphvx0-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
@@ -5966,8 +5964,6 @@ nsphvx0-critical {
 		};
 
 		nsphvx1-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
@@ -5986,8 +5982,6 @@ nsphvx1-critical {
 		};
 
 		nsphmx0-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
@@ -6006,8 +6000,6 @@ nsphmx0-critical {
 		};
 
 		nsphmx1-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
@@ -6026,8 +6018,6 @@ nsphmx1-critical {
 		};
 
 		nsphmx2-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
@@ -6046,8 +6036,6 @@ nsphmx2-critical {
 		};
 
 		nsphmx3-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
@@ -6066,8 +6054,6 @@ nsphmx3-critical {
 		};
 
 		video-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -6086,8 +6072,6 @@ video-critical {
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens1 13>;
 
 			trips {

-- 
2.34.1