[PATCH v2 1/3] dt-bindings: usb: dwc3: Add a property to reserve endpoints

[Andy Shevchenko]

Some of the endpoints may be reserved by hardware for different purposes,
e.g., tracing control and output. This is the case, for instance, on
Intel Merrifield and Moorefield platforms that reserve a few and USB driver
may not use them for the regular transfers. Add the respective bindings.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/usb/snps,dwc3-common.yaml     | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
index c956053fd036..71249b6ba616 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
@@ -65,6 +65,17 @@ properties:
       mode.
     type: boolean
 
+  snps,reserved-endpoints:
+    description:
+      Reserve endpoints for other needs, e.g, for tracing control and output.
+      When set, the driver will avoid using them for the regular USB transfers.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 30
+    items:
+      minimum: 2
+      maximum: 31
+
   snps,dis-start-transfer-quirk:
     description:
       When set, disable isoc START TRANSFER command failure SW work-around
-- 
2.43.0.rc1.1336.g36b5255a03ac