[PATCH net-next v6 5/7] net: stmmac: configure SerDes on mac_finish

[Choong Yong Liang]

SerDes will configure according to the provided interface mode after
finish a major reconfiguration of the interface mode.

Signed-off-by: Choong Yong Liang <yong.liang.choong@xxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d04543e5697b..56efc475e51c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1124,6 +1124,18 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 	return 0;
 }
 
+static int stmmac_mac_finish(struct phylink_config *config, unsigned int mode,
+			     phy_interface_t interface)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	if (priv->plat->config_serdes)
+		priv->plat->config_serdes(ndev, priv->plat->bsp_priv, interface);
+
+	return 0;
+}
+
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
 	.mac_get_caps = stmmac_mac_get_caps,
 	.mac_select_pcs = stmmac_mac_select_pcs,
@@ -1132,6 +1144,7 @@ static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
 	.mac_link_up = stmmac_mac_link_up,
 	.mac_disable_tx_lpi = stmmac_mac_disable_tx_lpi,
 	.mac_enable_tx_lpi = stmmac_mac_enable_tx_lpi,
+	.mac_finish = stmmac_mac_finish,
 };
 
 /**
-- 
2.34.1