Re: [PATCH v5 2/3] arm64: dts: rockchip: Add HDMI0 audio output for rk3588 SoC

[Quentin Schulz]

Hi Detlev,

On 2/3/25 6:16 PM, Detlev Casanova wrote:
> Use the simple-audio-card driver with the hdmi0 QP node as CODEC and
> the i2s5 device as CPU.
>
> The simple-audio-card,mclk-fs value is set to 128 as it is done in
> the downstream driver.
>
> The #sound-dai-cells value is set to 0 in the hdmi0 node so that it can be
> used as an audio codec node.
>
> Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
> index 8cfa30837ce72..767bdfc06b7ec 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
> @@ -1369,6 +1369,22 @@ i2s9_8ch: i2s@fddfc000 {
>   		status = "disabled";
>   	};
>   
> +	hdmi0_sound: hdmi0-sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,mclk-fs = <128>;
> +		simple-audio-card,name = "hdmi0";
> +		status = "disabled";
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&hdmi0>;
> +		};
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&i2s5_8ch>;
> +		};
> +	};
> +

This is an address/bus-less device, so I believe it needs to be put 
among other address/bus-less devices, which for Rockchip SoCs is at the 
top of the DT? c.f. 
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html

**I** would put it between the firmware and the pmu-a55 nodes.

Tested-by: Quentin Schulz <quentin.schulz@xxxxxxxxx> # RK3588 Tiger Haikou

Thanks!
Quentin