[PATCH net-next v3 0/3] net: phy: dp83822: Add support for changing the transmit amplitude voltage

[Dimitri Fedrau via B4 Relay]

Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Add support for configuration via DT.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
---
Changes in v3:
- Switch to tx-amplitude-100base-tx-percent in bindings
- Link to v2: https://lore.kernel.org/r/20250120-dp83822-tx-swing-v2-0-07c99dc42627@xxxxxxxxxxxx

Changes in v2:
- Remove binding ti,tx-amplitude-100base-tx-millivolt from ti,dp83822.yaml
- Add binding tx-amplitude-100base-tx-gain-milli to ethernet-phy.yaml
- Add helper to get tx amplitude gain from DT
- Link to v1: https://lore.kernel.org/r/20250113-dp83822-tx-swing-v1-0-7ed5a9d80010@xxxxxxxxxxxx

---
Dimitri Fedrau (3):
      dt-bindings: net: ethernet-phy: add property tx-amplitude-100base-tx-percent
      net: phy: Add helper for getting tx amplitude gain
      net: phy: dp83822: Add support for changing the transmit amplitude voltage

 .../devicetree/bindings/net/ethernet-phy.yaml      |  7 ++++
 drivers/net/phy/dp83822.c                          | 37 ++++++++++++++++++++++
 drivers/net/phy/phy_device.c                       | 20 +++++++++---
 include/linux/phy.h                                |  3 ++
 4 files changed, 63 insertions(+), 4 deletions(-)
---
base-commit: c2933b2befe25309f4c5cfbea0ca80909735fd76
change-id: 20241213-dp83822-tx-swing-5ba6c1e9b065

Best regards,
-- 
Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>