Re: [PATCH net-next v3 1/3] dt-bindings: net: ethernet-phy: add property tx-amplitude-100base-tx-percent

[Rob Herring (Arm)]

On Tue, 04 Feb 2025 14:09:15 +0100, Dimitri Fedrau wrote:
> Add property tx-amplitude-100base-tx-percent in the device tree bindings
> for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
> necessary to compensate losses on the PCB and connector, so the voltages
> measured on the RJ45 pins are conforming.
> 
> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ethernet-phy.yaml: properties:tx-amplitude-100base-tx-percent: '$ref' should not be valid under {'const': '$ref'}
	hint: Standard unit suffix properties don't need a type $ref
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250204-dp83822-tx-swing-v3-1-9798e96500d9@xxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.