Re: [PATCH v6 4/6] dt-bindings: iio: Add adis16550 bindings
From: Conor Dooley
Date: Tue Feb 04 2025 - 14:25:45 EST
On Tue, Feb 04, 2025 at 04:36:08PM +0200, Robert Budai wrote:
> Document the ADIS16550 device devicetree bindings.
>
> Co-developed-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> Signed-off-by: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
> Signed-off-by: Robert Budai <robert.budai@xxxxxxxxxx>
> ---
>
> v6:
> - applied blank line suggestions
> - added clock-frequency dependency change suggestions
> - yamllint corrections
>
> .../bindings/iio/imu/adi,adis16550.yaml | 83 +++++++++++++++++++
> MAINTAINERS | 9 ++
> 2 files changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
> new file mode 100644
> index 000000000000..8750bb937979
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADIS16550 and similar IMUs
> +
> +maintainers:
> + - Nuno Sa <nuno.sa@xxxxxxxxxx>
> + - Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
> + - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adis16550
> +
> + reg:
> + maxItems: 1
> +
> + spi-cpha: true
> + spi-cpol: true
> +
> + spi-max-frequency:
> + maximum: 15000000
> +
> + vdd-supply: true
> +
> + interrupts:
> + maxItems: 1
> +
> + reset-gpios:
> + description:
> + Must be the device tree identifier of the RESET pin. If specified,
> + it will be asserted during driver probe. As the line is active low,
> + it should be marked GPIO_ACTIVE_LOW.
> + maxItems: 1
> +
> + clocks:
> + description: If not provided, then the internal clock is used.
> + maxItems: 1
> +
> + clock-frequency:
> + description: Clock frequency in Hz when an external clock is used.
> + oneOf:
> + - minimum: 1
> + maximum: 128
> + - minimum: 3000
> + maximum: 4500
I don't get why this is a property, to be honest. When you've got an
external clock, why isn't the frequency obtained from the clock provider
node?
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - spi-cpha
> + - spi-cpol
> + - spi-max-frequency
> + - vdd-supply
> +
> +dependentRequired:
> + clock: [clock-frequency]
^
typo, missing s.
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +additionalProperties: false
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + imu@0 {
> + compatible = "adi,adis16550";
> + reg = <0>;
> + spi-max-frequency = <15000000>;
> + spi-cpol;
> + spi-cpha;
> + vdd-supply = <&vdd>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpio>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6247500cf427..8913e13dcaef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1452,6 +1452,15 @@ W: https://ez.analog.com/linux-software-drivers
> F: Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
> F: drivers/iio/imu/adis16475.c
>
> +ANALOG DEVICES INC ADIS16550 DRIVER
> +M: Nuno Sa <nuno.sa@xxxxxxxxxx>
> +M: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
> +M: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> +L: linux-iio@xxxxxxxxxxxxxxx
> +S: Supported
> +W: https://ez.analog.com/linux-software-drivers
> +F: Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
> +
> ANALOG DEVICES INC ADM1177 DRIVER
> M: Michael Hennerich <Michael.Hennerich@xxxxxxxxxx>
> L: linux-hwmon@xxxxxxxxxxxxxxx
> --
> 2.39.5
>
Attachment:
signature.asc
Description: PGP signature