Re: [PATCH net-next v3 1/4] net: stmmac: Switch to zero-copy in non-XDP RX path

[Furong Xu]

Hi Jon,

On Wed, 29 Jan 2025 14:51:35 +0000, Jon Hunter <jonathanh@xxxxxxxxxx> wrote:
> Hi Furong,
> 
> On 27/01/2025 13:28, Thierry Reding wrote:
> > On Sat, Jan 25, 2025 at 11:03:47PM +0800, Furong Xu wrote:  
> >> Hi Thierry
> >>
> >> On Sat, 25 Jan 2025 12:20:38 +0200, Ido Schimmel wrote:
> >>  
> >>> On Fri, Jan 24, 2025 at 10:42:56AM +0800, Furong Xu wrote:  
> >>>> On Thu, 23 Jan 2025 22:48:42 +0100, Andrew Lunn <andrew@xxxxxxx>
> >>>> wrote:  
> >>>>>> Just to clarify, the patch that you had us try was not intended
> >>>>>> as an actual fix, correct? It was only for diagnostic purposes,
> >>>>>> i.e. to see if there is some kind of cache coherence issue,
> >>>>>> which seems to be the case?  So perhaps the only fix needed is
> >>>>>> to add dma-coherent to our device tree?  
> >>>>>
> >>>>> That sounds quite error prone. How many other DT blobs are
> >>>>> missing the property? If the memory should be coherent, i would
> >>>>> expect the driver to allocate coherent memory. Or the driver
> >>>>> needs to handle non-coherent memory and add the necessary
> >>>>> flush/invalidates etc.  
> >>>>
> >>>> stmmac driver does the necessary cache flush/invalidates to
> >>>> maintain cache lines explicitly.  
> >>>
> >>> Given the problem happens when the kernel performs syncing, is it
> >>> possible that there is a problem with how the syncing is performed?
> >>>
> >>> I am not familiar with this driver, but it seems to allocate multiple
> >>> buffers per packet when split header is enabled and these buffers are
> >>> allocated from the same page pool (see stmmac_init_rx_buffers()).
> >>> Despite that, the driver is creating the page pool with a non-zero
> >>> offset (see __alloc_dma_rx_desc_resources()) to avoid syncing the
> >>> headroom, which is only present in the head buffer.
> >>>
> >>> I asked Thierry to test the following patch [1] and initial testing
> >>> seems OK. He also confirmed that "SPH feature enabled" shows up in the
> >>> kernel log.  
> >>
> >> It is recommended to disable the "SPH feature" by default unless some
> >> certain cases depend on it. Like Ido said, two large buffers being
> >> allocated from the same page pool for each packet, this is a huge waste
> >> of memory, and brings performance drops for most of general cases.
> >>
> >> Our downstream driver and two mainline drivers disable SPH by default:
> >> https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c#n357
> >> https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c#n471  
> > 
> > Okay, that's something we can look into changing. What would be an
> > example of a use-case depending on SPH? Also, isn't this something
> > that should be a policy that users can configure?
> > 
> > Irrespective of that we should fix the problems we are seeing with
> > SPH enabled.  
> 
> 
> Any update on this?

Sorry for my late response, I was on Chinese New Year holiday.

The fix is sent, and it will be so nice to have your Tested-by: tag there:
https://lore.kernel.org/all/20250207085639.13580-1-0x1207@xxxxxxxxx/