Re: [PATCH v2 04/10] arm64: dts: imx8mn: Add access-controller references

[Alexander Stein]

Hi Peng,

Am Freitag, 7. Februar 2025, 13:02:13 CET schrieb Peng Fan:
> On Fri, Feb 07, 2025 at 09:36:09AM +0100, Alexander Stein wrote:
> >Mark ocotp as a access-controller and add references on peripherals
> >which can be disabled (fused).
> 
> I am not sure whether gpcv2 changes should be included in this patchset
> or not. Just add access-controller for fused IP will not work.

Well, I was able to successfully boot a i.MX8M Nano DualLite.

> i.MX8M BLK-CTRL/GPC will hang if the related power domain is still touched
> by kernel. The pgc can't power up/down because clock is gated. 

Well, with GPU node disabled, no one should enable the power domain.
But to be on the safe side I would also add access-controllers to the
corresponding power domains as well.

> This comment also apply to i.MX8MM/P.

Sure. Do you have any information what is actually disabled by those fused?
It seems it's the IP and their power domains. Anything else?

Best regards,
Alexander
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/