[PATCH v12 0/9] Add support for AD485x DAS Family

[Antoniu Miclaus]

Add support for AD485X fully buffered, 8-channel simultaneous sampling,
16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
common-mode range inputs.

Most of the review comments which make sense in v9 were addressed. Some of them
might have been ommitted, especially those that are a matter of preference.
Since we reached v10, I tried to cover everything that was pointed out until now.

Antoniu Miclaus (9):
  iio: backend: add API for interface get
  iio: backend: add support for data size set
  iio: backend: add API for oversampling
  iio: adc: adi-axi-adc: add interface type
  dt-bindings: iio: adc: add ad485x axi variant
  iio: adc: adi-axi-adc: set data format
  iio: adc: adi-axi-adc: add oversampling
  dt-bindings: iio: adc: add ad4851
  iio: adc: ad4851: add ad485x driver

 .../bindings/iio/adc/adi,ad4851.yaml          |  153 ++
 .../bindings/iio/adc/adi,axi-adc.yaml         |    2 +
 drivers/iio/adc/Kconfig                       |   14 +
 drivers/iio/adc/Makefile                      |    1 +
 drivers/iio/adc/ad4851.c                      | 1316 +++++++++++++++++
 drivers/iio/adc/adi-axi-adc.c                 |  146 +-
 drivers/iio/industrialio-backend.c            |   60 +
 include/linux/iio/backend.h                   |   19 +
 8 files changed, 1702 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
 create mode 100644 drivers/iio/adc/ad4851.c

-- 
2.48.1