[PATCH v6 07/42] x86/resctrl: Add max_bw to struct resctrl_membw

[James Morse]

__rdt_get_mem_config_amd() and __get_mem_config_intel() both use
the default_ctrl property as a maximum value. This is because the
MBA schema works differently between these platforms. Doing this
complicates determining whether the default_ctrl property belongs
to the arch code, or can be derived from the schema format.

Deriving the maximum or default value from the schema format would
avoid the architecture code having to tell resctrl such obvious
things as the maximum percentage is 100, and the maximum bitmap
is all ones.

Maximum bandwidth is always going to vary per platform. Add
max_bw as a special case. This is currently used for the maximum
MBA percentage on Intel platforms, but can be removed from the
architecture code if 'percentage' becomes a schema format resctrl
supports directly.

This value isn't needed for other schema formats.

This will allow the default_ctrl to be generated from the schema
properties when it is needed.

Signed-off-by: James Morse <james.morse@xxxxxxx>
Tested-by: Carl Worth <carl@xxxxxxxxxxxxxxxxxxxxxx> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@xxxxxxxxxxxxxx>
Reviewed-by: Shaopeng Tan <tan.shaopeng@xxxxxxxxxxxxxx>
Reviewed-by: Tony Luck <tony.luck@xxxxxxxxx>
---
Changes since v5:
 * Removed redundant setting of schema_fmt on AMD platforms.
 * Fixed off by one in cbm_validate().

Changes since v2:
 * This patch is new.
---
 arch/x86/kernel/cpu/resctrl/core.c        | 2 ++
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 4 ++--
 include/linux/resctrl.h                   | 2 ++
 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 754fb65565ec..4504a12efc97 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -212,6 +212,7 @@ static __init bool __get_mem_config_intel(struct rdt_resource *r)
 	hw_res->num_closid = edx.split.cos_max + 1;
 	max_delay = eax.split.max_delay + 1;
 	r->default_ctrl = MAX_MBA_BW;
+	r->membw.max_bw = MAX_MBA_BW;
 	r->membw.arch_needs_linear = true;
 	if (ecx & MBA_IS_LINEAR) {
 		r->membw.delay_linear = true;
@@ -250,6 +251,7 @@ static __init bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 	cpuid_count(0x80000020, subleaf, &eax, &ebx, &ecx, &edx);
 	hw_res->num_closid = edx + 1;
 	r->default_ctrl = 1 << eax;
+	r->membw.max_bw = 1 << eax;
 
 	/* AMD does not use delay */
 	r->membw.delay_linear = false;
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 59610b209b4e..23a01eaebd58 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -63,9 +63,9 @@ static bool bw_validate(char *buf, u32 *data, struct rdt_resource *r)
 		return true;
 	}
 
-	if (bw < r->membw.min_bw || bw > r->default_ctrl) {
+	if (bw < r->membw.min_bw || bw > r->membw.max_bw) {
 		rdt_last_cmd_printf("MB value %u out of range [%d,%d]\n",
-				    bw, r->membw.min_bw, r->default_ctrl);
+				    bw, r->membw.min_bw, r->membw.max_bw);
 		return false;
 	}
 
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 41eee6377a0f..cfe451ae6ded 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -165,6 +165,7 @@ enum membw_throttle_mode {
 /**
  * struct resctrl_membw - Memory bandwidth allocation related data
  * @min_bw:		Minimum memory bandwidth percentage user can request
+ * @max_bw:		Maximum memory bandwidth value, used as the reset value
  * @bw_gran:		Granularity at which the memory bandwidth is allocated
  * @delay_linear:	True if memory B/W delay is in linear scale
  * @arch_needs_linear:	True if we can't configure non-linear resources
@@ -175,6 +176,7 @@ enum membw_throttle_mode {
  */
 struct resctrl_membw {
 	u32				min_bw;
+	u32				max_bw;
 	u32				bw_gran;
 	u32				delay_linear;
 	bool				arch_needs_linear;
-- 
2.39.2