[PATCH] ARM: dts: qcom: msm8960: Add BAM

From: Rudraksha Gupta
Date: Sat Feb 08 2025 - 14:21:52 EST


Copy bam nodes from qcom-ipq8064.dtsi and change
the regulator values to match msm8960.

Signed-off-by: Rudraksha Gupta <guptarud@xxxxxxxxx>
Co-developed-by: Sam Day <me@xxxxxxxxxxx>
Signed-off-by: Sam Day <me@xxxxxxxxxxx>
---
To: Bjorn Andersson <andersson@xxxxxxxxxx>
To: Konrad Dybcio <konradybcio@xxxxxxxxxx>
To: Rob Herring <robh@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
To: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 865fe7cc39511d7cb9ec5c4b12100404f77e2989..01eed68c8f89b547ff0c173b2ca85a54efa29b7f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -275,11 +275,31 @@ rng@1a500000 {
clock-names = "core";
};

+ sdcc3bam: dma-controller@12182000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x2000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc1bam: dma-controller@12402000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x2000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
- reg = <0x12180000 0x8000>;
+ reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
@@ -289,13 +309,15 @@ sdcc3: mmc@12180000 {
max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
};

sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x8000>;
+ reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
@@ -305,6 +327,8 @@ sdcc1: mmc@12400000 {
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
};

tcsr: syscon@1a400000 {

---
base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04
change-id: 20250208-expressatt-bam-d0ed9863a626

Best regards,
--
Rudraksha Gupta <guptarud@xxxxxxxxx>