[PATCH 0/2] Add bootph-all to SERDES3 for USB DFU Boot on J721E
From: Siddharth Vadapalli
Date: Sun Feb 09 2025 - 03:18:29 EST
Hello,
This series is based on linux-next tagged next-20250207.
J721E SoC supports USB DFU Boot via USB0 instance of USB. On both
J721E-EVM - (J721E SoM + J7 Common Processor Board) and
J721E-SK, the USB Type-C interface which is connected to USB0 via
SERDES3 is used for USB DFU boot.
Series adds "bootph-all" tag to the "serdes3_usb_link" device-tree node
which is the USB3 PHY for USB0, thereby enabling USB DFU boot.
Regards,
Siddharth.
Siddharth Vadapalli (2):
arm64: dts: ti: k3-j721e-common-proc-board: Add boot phase tag to
SERDES3
arm64: dts: ti: k3-j721e-sk: Add boot phase tag to SERDES3
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1 +
2 files changed, 2 insertions(+)
--
2.43.0