Re: [PATCH v1 2/3] i3c: master: Add Qualcomm I3C master controller driver

[Krzysztof Kozlowski]

On 07/02/2025 13:03, Mukesh Kumar Savaliya wrote:
>>> +	gi3c->se.clk = devm_clk_get(&pdev->dev, "se-clk");
>>> +	if (IS_ERR(gi3c->se.clk)) {
>>> +		ret = PTR_ERR(gi3c->se.clk);
>>> +		dev_err(&pdev->dev, "Error getting SE Core clk %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = device_property_read_u32(&pdev->dev, "se-clock-frequency", &gi3c->clk_src_freq);
>>
>> You never tested your DTS or this code... Drop
>>
> I have tested on SM8550 MTP only. Below entry in my internal/local DTSI.


And how is it supposed to work? Are you going to send us your local
internal DTSI? Is it going to pass any checks?

> Do you mean to say i should add this property in yaml too ?

Yes.

You cannot add undocumented ABI. That's a strong NAK.


> se-clock-frequency = <100000000>;
>>
>>> +	if (ret) {
>>> +		dev_info(&pdev->dev, "SE clk freq not specified, default to 100 MHz.\n");
>>> +		gi3c->clk_src_freq = 100000000;
>>> +	}
>>> +
>>> +	ret = geni_icc_get(&gi3c->se, NULL);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* Set the bus quota to a reasonable value for register access */
>>> +	gi3c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
>>> +	gi3c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
>>> +	ret = geni_icc_set_bw(&gi3c->se);
>>> +	if (ret) {
>>> +		dev_err(&pdev->dev, "%s: icc set bw failed ret:%d\n", __func__, ret);
>>> +		return ret;
>>> +	}
>>> +	dev_dbg(&pdev->dev, "%s: GENI_TO_CORE:%d CPU_TO_GENI:%d\n", __func__,
>>> +		gi3c->se.icc_paths[GENI_TO_CORE].avg_bw, gi3c->se.icc_paths[CPU_TO_GENI].avg_bw);
>>> +
>>> +	ret = device_property_read_u32(&pdev->dev, "dfs-index", &gi3c->dfs_idx);
>>
>> The same. You cannot send us hidden ABI.
>>
>> This code does not look like ready for upstream. Are you sure it was
>> internally reviewed?
>>
> yes, we have taken 2 rounds internally.


And none of the reviewers spotted undocumented ABI? OK, learning
experience for me.


> Are you saying i should add this into yaml ?  what do you mean by 
> hiddern ABI ?


Where is the documentation of the ABI?



Best regards,
Krzysztof