Re: [PATCH v1 2/3] i3c: master: Add Qualcomm I3C master controller driver

[Mukesh Kumar Savaliya]

On 2/13/2025 1:09 AM, Krzysztof Kozlowski wrote:
> On 12/02/2025 20:29, Mukesh Kumar Savaliya wrote:
> > Thanks a lot Rob ! sorry, i was late to respond on this while waiting
> > for other comments agreements.
> >
> > On 2/12/2025 3:11 AM, Rob Herring wrote:
> > > On Mon, Feb 10, 2025 at 09:41:28PM +0530, Mukesh Kumar Savaliya wrote:
> > > > Thanks Krzysztof !
> > > >
> > > > On 2/9/2025 5:10 PM, Krzysztof Kozlowski wrote:
> > > > > On 07/02/2025 13:03, Mukesh Kumar Savaliya wrote:
> > > > > > > > +	gi3c->se.clk = devm_clk_get(&pdev->dev, "se-clk");
> > > > > > > > +	if (IS_ERR(gi3c->se.clk)) {
> > > > > > > > +		ret = PTR_ERR(gi3c->se.clk);
> > > > > > > > +		dev_err(&pdev->dev, "Error getting SE Core clk %d\n", ret);
> > > > > > > > +		return ret;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > > +	ret = device_property_read_u32(&pdev->dev, "se-clock-frequency", &gi3c->clk_src_freq);
> > > > > > >
> > > > > > > You never tested your DTS or this code... Drop
> > > > > > I have tested on SM8550 MTP only. Below entry in my internal/local DTSI.
> > > > >
> > > > >
> > > > > And how is it supposed to work? Are you going to send us your local
> > > > > internal DTSI? Is it going to pass any checks?
> > > > was saying about code was testing with MTP. DTS was tested using dt-bindings
> > > > check.
> > >
> > > make dtbs_check is how you test.
> > Sure, we are running "make dt_binding_check
> > DT_SCHEMA_FILES=qcom,i3c-master.yaml"
>
> Hm? Please read it again. You anyway have it documented in your company
> guidebook, so I expect you follow that one *very* carefully because
> reviewers repeating the same as your company book and then repeating
> themselves three times is just too much.
sorry, i will run what Rob has pointed "make dtbs_check" as it's giving 
me exact clarity what to do. I just mentioned what i was doing.
And as you pointed, will follow complete internal guide too if it's 
missing dtbs check. Thanks !
> Best regards,
> Krzysztof