[PATCH v2 03/10] i2c: bcm-kona: Use i2c_10bit_addr_*_from_msg() helpers

[Andy Shevchenko]

Use i2c_10bit_addr_*_from_msg() helpers instead of local copy.
No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-bcm-kona.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 340fe1305dd9..9d8838bbd938 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -471,12 +471,12 @@ static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
 
 	if (msg->flags & I2C_M_TEN) {
 		/* First byte is 11110XX0 where XX is upper 2 bits */
-		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
+		addr = i2c_10bit_addr_hi_from_msg(msg) & ~I2C_M_RD;
 		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
 			return -EREMOTEIO;
 
 		/* Second byte is the remaining 8 bits */
-		addr = msg->addr & 0xFF;
+		addr = i2c_10bit_addr_lo_from_msg(msg);
 		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
 			return -EREMOTEIO;
 
@@ -486,7 +486,7 @@ static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
 				return -EREMOTEIO;
 
 			/* Then re-send the first byte with the read bit set */
-			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
+			addr = i2c_10bit_addr_hi_from_msg(msg);
 			if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
 				return -EREMOTEIO;
 		}
-- 
2.45.1.3035.g276e886db78b