Re: [PATCH] media: imx335: Set vblank immediately
From: Sakari Ailus
Date: Sun Feb 16 2025 - 05:01:40 EST
Hi Paul,
On Fri, Feb 14, 2025 at 10:37:09PM +0900, Paul Elder wrote:
> When the vblank v4l2 control is set, it does not get written to the
> hardware immediately. It only gets updated when exposure is set. Change
> the behavior such that the vblank is written immediately when the
> control is set.
>
> Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/imx335.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index fcfd1d851bd4..e73a23bbbc89 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -559,12 +559,12 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
> imx335->vblank,
> imx335->vblank + imx335->cur_mode->height);
>
> - return __v4l2_ctrl_modify_range(imx335->exp_ctrl,
> - IMX335_EXPOSURE_MIN,
> - imx335->vblank +
> - imx335->cur_mode->height -
> - IMX335_EXPOSURE_OFFSET,
> - 1, IMX335_EXPOSURE_DEFAULT);
> + __v4l2_ctrl_modify_range(imx335->exp_ctrl,
Indentation.
You're also missing an error check here.
> + IMX335_EXPOSURE_MIN,
> + imx335->vblank +
> + imx335->cur_mode->height -
> + IMX335_EXPOSURE_OFFSET,
> + 1, IMX335_EXPOSURE_DEFAULT);
> }
>
> /*
> @@ -575,6 +575,13 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
> return 0;
>
> switch (ctrl->id) {
> + case V4L2_CID_VBLANK:
> + exposure = imx335->exp_ctrl->val;
> + analog_gain = imx335->again_ctrl->val;
> +
> + ret = imx335_update_exp_gain(imx335, exposure, analog_gain);
> +
> + break;
> case V4L2_CID_EXPOSURE:
> exposure = ctrl->val;
> analog_gain = imx335->again_ctrl->val;
--
Regards,
Sakari Ailus