Re: [PATCH net-next v5 1/3] dt-bindings: net: ethernet-phy: add property tx-amplitude-100base-tx-percent

[Andrew Lunn]

On Fri, Feb 14, 2025 at 03:14:09PM +0100, Dimitri Fedrau via B4 Relay wrote:
> From: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
> 
> Add property tx-amplitude-100base-tx-percent in the device tree bindings
> for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
> necessary to compensate losses on the PCB and connector, so the voltages
> measured on the RJ45 pins are conforming.
> 
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew