[PATCH] dmaengine: ti: edma: support sw triggered chans in of_edma_xlate()

[Matthew Majewski]

The .of_edma_xlate() function always sets the hw_triggered flag to
true. This causes sw triggered channels consumed via the device-tree
to not function properly, as the driver incorrectly assumes they are
hw triggered. Modify the xlate() function to correctly set the
hw_triggered flag to false for channels reserved for memcpy
operation (ie, sw triggered).

Signed-off-by: Matthew Majewski <mattwmajewski@xxxxxxxxx>
---
 drivers/dma/ti/edma.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 4ece125b2ae7..0554a18d84ba 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2258,8 +2258,12 @@ static struct dma_chan *of_edma_xlate(struct of_phandle_args *dma_spec,
 
 	return NULL;
 out:
-	/* The channel is going to be used as HW synchronized */
-	echan->hw_triggered = true;
+	/*
+	 * The channel is going to be HW synchronized, unless it was
+	 * reserved as a memcpy channel
+	 */
+	echan->hw_triggered =
+		!edma_is_memcpy_channel(i, ecc->info->memcpy_channels);
 	return dma_get_slave_channel(chan);
 }
 #else
-- 
2.25.1