Re: [PATCH v3 1/8] dt-bindings: spi: Add STM32 OSPI controller

[Patrice CHOTARD]

On 2/17/25 10:17, Philipp Zabel wrote:
> On Mo, 2025-02-10 at 14:18 +0100, patrice.chotard@xxxxxxxxxxx wrote:
>> From: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
>>
>> Add device tree bindings for the STM32 OSPI controller.
>>
>> Main features of the Octo-SPI controller :
>>   - support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
>>   - Three functional modes: indirect, automatic-status polling,
>>     memory-mapped.
>>   - Up to 4 Gbytes of external memory can be addressed in indirect
>>     mode (per physical port and per CS), and up to 256 Mbytes in
>>     memory-mapped mode (combined for both physical ports and per CS).
>>   - Single-, dual-, quad-, and octal-SPI communication.
>>   - Dual-quad communication.
>>   - Single data rate (SDR) and double transfer rate (DTR).
>>   - Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
>>   - Data strobe support.
>>   - DMA channel for indirect mode.
>>   - Double CS mapping that allows two external flash devices to be
>>     addressed with a single OCTOSPI controller mapped on a single
>>     OCTOSPI port.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
>> ---
>>  .../bindings/spi/st,stm32mp25-ospi.yaml       | 105 ++++++++++++++++++
>>  1 file changed, 105 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml b/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
>> new file mode 100644
>> index 000000000000..5f276f27dc4c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
>> @@ -0,0 +1,105 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/st,stm32mp25-ospi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: STMicroelectronics STM32 Octal Serial Peripheral Interface (OSPI)
>> +
>> +maintainers:
>> +  - Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
>> +
>> +allOf:
>> +  - $ref: spi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    const: st,stm32mp25-ospi
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  memory-region:
>> +    description:
>> +      Memory region to be used for memory-map read access.
>> +      In memory-mapped mode, read access are performed from the memory
>> +      device using the direct mapping.
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  resets:
>> +    items:
>> +      - description: phandle to OSPI block reset
>> +      - description: phandle to delay block reset
> 
> Are you positive that these will only ever have to be reset together?
> Otherwise I'd add a reset-names property just in case.

Yes i confirm that these both reset are reset together.

Thanks
Patrice

> 
> regards
> Philipp