Re: [PATCH RESEND v3 08/17] iio: adc: ad7768-1: convert driver to use regmap

[David Lechner]

On 2/12/25 12:17 PM, Jonathan Santos wrote:
> Convert the AD7768-1 driver to use the regmap API for register
> access. This change simplifies and standardizes register interactions,
> reducing code duplication and improving maintainability.
> 
> Create two regmap configurations, one for 8-bit register values and
> other for 24-bit register values.
> 
> Since we are using regmap now, define the remaining registers from 0x32
> to 0x34.
> 
> Signed-off-by: Jonathan Santos <Jonathan.Santos@xxxxxxxxxx>
> ---
> v3 Changes:
> * Included a second register map for the 24-bit register values.
> * Added register tables to separate the 24-bit from the 8-bit values.
> 
> v2 Changes:
> * New patch in v2.
> ---

Should also add a `select REGMAP_SPI` line to the Kconfig
for this driver to avoid compile errors for random configs.

>  drivers/iio/adc/ad7768-1.c | 148 +++++++++++++++++++++++++------------
>  1 file changed, 101 insertions(+), 47 deletions(-)
> 


...

> @@ -260,15 +297,21 @@ static int ad7768_reg_access(struct iio_dev *indio_dev,
>  		return ret;
>  


I think we should set ret = -EINVAL; here, otherwise the ret from above
can survive and we return 0 even though no read or write was done if
the requested register was not valid.

>  	if (readval) {
> -		ret = ad7768_spi_reg_read(st, reg, 1);
> -		if (ret < 0)
> -			goto err_release;
> -		*readval = ret;
> -		ret = 0;
> +		if (regmap_check_range_table(st->regmap, reg, &ad7768_regmap_rd_table))
> +			ret = regmap_read(st->regmap, reg, readval);
> +
> +		if (regmap_check_range_table(st->regmap24, reg, &ad7768_regmap24_rd_table))
> +			ret = regmap_read(st->regmap24, reg, readval);
> +
>  	} else {
> -		ret = ad7768_spi_reg_write(st, reg, writeval);
> +		if (regmap_check_range_table(st->regmap, reg, &ad7768_regmap_wr_table))
> +			ret = regmap_write(st->regmap, reg, writeval);
> +
> +		if (regmap_check_range_table(st->regmap24, reg, &ad7768_regmap24_wr_table))
> +			ret = regmap_write(st->regmap24, reg, writeval);
> +
>  	}
> -err_release:
> +
>  	iio_device_release_direct_mode(indio_dev);
>  
>  	return ret;