Re: [PATCH iwl-next v5 1/9] net: ethtool: mm: extract stmmac verification logic into common library

From: Vladimir Oltean
Date: Fri Feb 21 2025 - 04:59:04 EST


On Fri, Feb 21, 2025 at 05:42:49PM +0800, Furong Xu wrote:
> > +void ethtool_mmsv_link_state_handle(struct ethtool_mmsv *mmsv, bool up)
> > +{
> > + unsigned long flags;
> > +
> > + ethtool_mmsv_stop(mmsv);
> > +
> > + spin_lock_irqsave(&mmsv->lock, flags);
> > +
> > + if (up && mmsv->pmac_enabled) {
> > + /* VERIFY process requires pMAC enabled when NIC comes up */
> > + ethtool_mmsv_configure_pmac(mmsv, true);
> > +
> > + /* New link => maybe new partner => new verification process */
> > + ethtool_mmsv_apply(mmsv);
> > + } else {
> > + mmsv->status = ETHTOOL_MM_VERIFY_STATUS_INITIAL;
>
> Tested this patch on my side, everything works well, but the verify-status
> is a little weird:
>
> # kernel booted, check initial states:
> ethtool --include-statistics --json --show-mm eth1
> [ {
> "ifname": "eth1",
> "pmac-enabled": false,
> "tx-enabled": false,
> "tx-active": false,
> "tx-min-frag-size": 60,
> "rx-min-frag-size": 60,
> "verify-enabled": false,
> "verify-time": 128,
> "max-verify-time": 128,
> "verify-status": "INITIAL",
> "statistics": {
> "MACMergeFrameAssErrorCount": 0,
> "MACMergeFrameSmdErrorCount": 0,
> "MACMergeFrameAssOkCount": 0,
> "MACMergeFragCountRx": 0,
> "MACMergeFragCountTx": 0,
> "MACMergeHoldCount": 0
> }
> } ]
>
> # Enable pMAC by: ethtool --set-mm eth1 pmac-enabled on
> ethtool --include-statistics --json --show-mm eth1
> [ {
> "ifname": "eth1",
> "pmac-enabled": true,
> "tx-enabled": false,
> "tx-active": false,
> "tx-min-frag-size": 60,
> "rx-min-frag-size": 60,
> "verify-enabled": false,
> "verify-time": 128,
> "max-verify-time": 128,
> "verify-status": "DISABLED",
> "statistics": {
> "MACMergeFrameAssErrorCount": 0,
> "MACMergeFrameSmdErrorCount": 0,
> "MACMergeFrameAssOkCount": 0,
> "MACMergeFragCountRx": 0,
> "MACMergeFragCountTx": 0,
> "MACMergeHoldCount": 0
> }
> } ]
>
> # Disable pMAC by: ethtool --set-mm eth1 pmac-enabled off
> ethtool --include-statistics --json --show-mm eth1
> [ {
> "ifname": "eth1",
> "pmac-enabled": true,
> "tx-enabled": false,
> "tx-active": false,
> "tx-min-frag-size": 60,
> "rx-min-frag-size": 60,
> "verify-enabled": false,
> "verify-time": 128,
> "max-verify-time": 128,
> "verify-status": "DISABLED",
> "statistics": {
> "MACMergeFrameAssErrorCount": 0,
> "MACMergeFrameSmdErrorCount": 0,
> "MACMergeFrameAssOkCount": 0,
> "MACMergeFragCountRx": 0,
> "MACMergeFragCountTx": 0,
> "MACMergeHoldCount": 0
> }
> } ]
>
> verify-status always normal on other cases.

Thanks for testing and for reporting this inconsistency.

> @Vladimir, maybe we shouldn't update mmsv->status in ethtool_mmsv_link_state_handle()?
> Or, update mmsv->status like below:
> mmsv->status = mmsv->pmac_enabled ?
> ETHTOOL_MM_VERIFY_STATUS_INITIAL :
> ETHTOOL_MM_VERIFY_STATUS_DISABLED;

You mean mmsv->status = mmsv->verify_enabled ? ETHTOOL_MM_VERIFY_STATUS_INITIAL :
~~~~~~~~~~~~~~~~~~~~ ETHTOOL_MM_VERIFY_STATUS_DISABLED?

> Anyway, this is too minor, so:
>
> Tested-by: Furong Xu <0x1207@xxxxxxxxx>
>
>
> > + mmsv->verify_retries = ETHTOOL_MM_MAX_VERIFY_RETRIES;
> > +
> > + /* No link or pMAC not enabled */
> > + ethtool_mmsv_configure_pmac(mmsv, false);
> > + ethtool_mmsv_configure_tx(mmsv, false);
> > + }
> > +
> > + spin_unlock_irqrestore(&mmsv->lock, flags);
> > +}
> > +EXPORT_SYMBOL_GPL(ethtool_mmsv_link_state_handle);