Re: [PATCH v10 1/1] arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node

[Alexey Klimov]

On Fri Feb 21, 2025 at 5:10 PM GMT, Janaki Ramaiah Thota wrote:
> Add the PMU node for WCN6750 present on the qcs6490-rb3gen

Is it rb3gen or rb3gen2? Also in the subject.

The file that you patch seems to be "rb3gen2".

> board and assign its power outputs to the Bluetooth module.
>
> In WCN6750 module sw_ctrl and wifi-enable pins are handled
> in the wifi controller firmware. Therefore, it is not required
> to have those pins' entries in the PMU node.
>
> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 171 ++++++++++++++++++-
>  1 file changed, 170 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 7a36c90ad4ec..de03770e0b90 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts

[..]

Best regards,
Alexey