Re: [PATCH v3 3/4] usb: mtk-xhci: add support remote wakeup of mt8196
From: Chunfeng Yun (云春峰)
Date: Sat Feb 22 2025 - 03:34:11 EST
On Tue, 2025-02-18 at 09:57 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>
>
> Il 15/02/25 11:06, Chunfeng Yun ha scritto:
> > There are three USB controllers on mt8196, each controller's wakeup
> > control is different, add some specific versions for them.
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
>
> Since all of the USB controllers of the MT8196 SoC are behind MTU3,
> and
> since the wakeup control for all of them will be handled by the MTU3
> driver
> and *not* by the xhci-mtk driver....
>
> NACK!
>
> Please drop this commit.
Please help to pick up these patches, I also hate to add these specific
wakeup ways, but our haredware designer do not follow the hwip rules
sometimes.
Thank you.
>
> Cheers,
> Angelo
>
> > ---
> > v3: no changes
> > v2: modify marcos name
> > ---
> > drivers/usb/host/xhci-mtk.c | 26 ++++++++++++++++++++++++++
> > 1 file changed, 26 insertions(+)
> >
> > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-
> > mtk.c
> > index 904831344440..3f8e37b25322 100644
> > --- a/drivers/usb/host/xhci-mtk.c
> > +++ b/drivers/usb/host/xhci-mtk.c
> > @@ -113,6 +113,14 @@
> > #define WC1_IS_P_95 BIT(12)
> > #define WC1_IS_EN_P0_95 BIT(6)
> >
> > +/* mt8196 */
> > +#define PERI_WK_CTRL0_8196 0x08
> > +#define WC0_IS_EN_P0_96 BIT(0)
> > +#define WC0_IS_EN_P1_96 BIT(7)
> > +
> > +#define PERI_WK_CTRL1_8196 0x10
> > +#define WC1_IS_EN_P2_96 BIT(0)
> > +
> > /* mt2712 etc */
> > #define PERI_SSUSB_SPM_CTRL 0x0
> > #define SSC_IP_SLEEP_EN BIT(4)
> > @@ -129,6 +137,9 @@ enum ssusb_uwk_vers {
> > SSUSB_UWK_V1_4, /* mt8195 IP1 */
> > SSUSB_UWK_V1_5, /* mt8195 IP2 */
> > SSUSB_UWK_V1_6, /* mt8195 IP3 */
> > + SSUSB_UWK_V1_7, /* mt8196 IP0 */
> > + SSUSB_UWK_V1_8, /* mt8196 IP1 */
> > + SSUSB_UWK_V1_9, /* mt8196 IP2 */
> > };
> >
> > /*
> > @@ -381,6 +392,21 @@ static void usb_wakeup_ip_sleep_set(struct
> > xhci_hcd_mtk *mtk, bool enable)
> > msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) |
> > WC0_IS_P_95;
> > val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) :
> > 0;
> > break;
> > + case SSUSB_UWK_V1_7:
> > + reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8196;
> > + msk = WC0_IS_EN_P0_96;
> > + val = enable ? msk : 0;
> > + break;
> > + case SSUSB_UWK_V1_8:
> > + reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8196;
> > + msk = WC0_IS_EN_P1_96;
> > + val = enable ? msk : 0;
> > + break;
> > + case SSUSB_UWK_V1_9:
> > + reg = mtk->uwk_reg_base + PERI_WK_CTRL1_8196;
> > + msk = WC1_IS_EN_P2_96;
> > + val = enable ? msk : 0;
> > + break;
> > case SSUSB_UWK_V2:
> > reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
> > msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
>
>
>