Re: [PATCH 3/4] arm64: dts: qcom: sdm632-fairphone-fp3: Add firmware-name for adsp & wcnss

[Dmitry Baryshkov]

On Sat, Feb 22, 2025 at 02:00:49PM +0100, Luca Weiss wrote:
> Set the paths where the device-specific firmware can be found for this
> device.
> 
> Fairphone 3 was shipped with secure-boot off so any testkey-signed
> firmware is accepted.
> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> index 08ffe77d762c3a97f470efbfb5064282fe2090da..5611209dbfa41d7834af7903535ed3e05604ba63 100644
> --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> @@ -82,6 +82,8 @@ nfc@28 {
>  };
>  
>  &lpass {
> +	firmware-name = "qcom/msm8953/fairphone/fp3/adsp.mbn";

If any firmware is okay, wouldn't it be better to use
"qcom/msm8953/foo.mbn" ? This way if we get any of the firmware (yeah,
I'm a dreamer), then FB3 can pick it up.

> +
>  	status = "okay";
>  };
>  
> @@ -297,11 +299,16 @@ &usb_dwc3_hs {
>  };
>  
>  &wcnss {
> +	firmware-name = "qcom/msm8953/fairphone/fp3/wcnss.mbn";
>  	vddpx-supply = <&pm8953_l5>;
>  
>  	status = "okay";
>  };
>  
> +&wcnss_ctrl {
> +	firmware-name = "qcom/msm8953/fairphone/fp3/WCNSS_qcom_wlan_nv.bin";

then this can become "qcom/msm8953/WCNSS_qcom_wlan_nv_fp3.bin"

> +};
> +
>  &wcnss_iris {
>  	compatible = "qcom,wcn3680";
>  
> 
> -- 
> 2.48.1
> 

-- 
With best wishes
Dmitry