Re: [PATCH v1 2/3] arm64: dts: qcom: ipq9574: Enable SPI NAND for ipq9574

[Konrad Dybcio]

On 24.02.2025 12:37 PM, Md Sadre Alam wrote:
> Enable SPI NAND support for ipq9574 SoC.
> 
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> ---
> * Moved out ipq9574-rdp-common.dtsi changes into this patch from
>   previous patch
> ---
>  .../boot/dts/qcom/ipq9574-rdp-common.dtsi     | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> index ae12f069f26f..6d1e84301671 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> @@ -139,6 +139,49 @@ gpio_leds_default: gpio-leds-default-state {
>  		drive-strength = <8>;
>  		bias-pull-up;
>  	};
> +
> +	qpic_snand_default_state: qpic-snand-default-state {
> +		clock-pins {
> +			pins = "gpio5";
> +			function = "qspi_clk";
> +			drive-strength = <8>;
> +			bias-disable;
> +		};
> +
> +		cs-pins {
> +			pins = "gpio4";
> +			function = "qspi_cs";
> +			drive-strength = <8>;
> +			bias-disable;
> +		};
> +
> +		data-pins {
> +			pins = "gpio0", "gpio1", "gpio2", "gpio3";
> +			function = "qspi_data";
> +			drive-strength = <8>;
> +			bias-disable;
> +		};
> +	};
> +};
> +
> +&qpic_bam {
> +	status = "okay";
> +};
> +
> +&qpic_nand {
> +	pinctrl-0 = <&qpic_snand_default_state>;
> +	pinctrl-names = "default";
> +	status = "okay";

Please add a newline before status

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad