Re: [PATCH v3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq

[Konrad Dybcio]

On 17.02.2025 6:55 PM, Stephan Gerhold wrote:
> Add the WiFi/BT nodes for QCP and describe the regulators for the WCN7850
> combo chip using the new power sequencing bindings. All voltages are
> derived from chained fixed regulators controlled using a single GPIO.
> 
> The same setup also works for CRD (and likely most of the other X1E80100
> laptops). However, unlike the QCP they use soldered or removable M.2 cards
> supplied by a single 3.3V fixed regulator. The other necessary voltages are
> then derived inside the M.2 card. Describing this properly requires
> new bindings, so this commit only adds QCP for now.
> 
> Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad