[PATCH] media: platform: rpi1-cfe: fix pad in call to get_mbus_config()

[Cosmin Tanislav]

The source subdevice might be using a source pad not equal to 0.

Use the already existing source_pad field of cfe.

Fixes: e7bad98c205d ("media: v4l: Convert the users of v4l2_get_link_freq to call it on a pad")
Signed-off-by: Cosmin Tanislav <demonsingur@xxxxxxxxx>
---
 drivers/media/platform/raspberrypi/rp1-cfe/cfe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
index 69a5f23e7954..7db4fe5e0fd4 100644
--- a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
+++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
@@ -1206,8 +1206,8 @@ static int cfe_start_streaming(struct vb2_queue *vq, unsigned int count)
 	cfg_reg_write(cfe, MIPICFG_INTE,
 		      MIPICFG_INT_CSI_DMA | MIPICFG_INT_PISP_FE);
 
-	ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config, 0,
-			       &mbus_config);
+	ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config,
+			       cfe->source_pad, &mbus_config);
 	if (ret < 0 && ret != -ENOIOCTLCMD) {
 		cfe_err(cfe, "g_mbus_config failed\n");
 		goto err_clear_inte;
-- 
2.48.1