[PATCH net-next v7 0/2] RTL9300 MDIO driver

[Chris Packham]

This series adds a driver for the MDIO controller on the RTL9300 family
of devices. The controller is a little unique in that we can't access the SMI
interfaces directly. This means we need to use the hardware description from
the DTS to compute a mapping of switch port to mdio bus/address.

The dt-bindings have been applied to net-next.

I've dropped a patch that added PHYs to the cameo-rtl9302c board as I know that
will need updating once some of the other in-flight changes make it into
linux-mips.

Chris Packham (2):
  net: mdio: Add RTL9300 MDIO driver
  mips: dts: realtek: Add MDIO controller

 arch/mips/boot/dts/realtek/rtl930x.dtsi |  33 ++
 drivers/net/mdio/Kconfig                |   7 +
 drivers/net/mdio/Makefile               |   1 +
 drivers/net/mdio/mdio-realtek-rtl9300.c | 475 ++++++++++++++++++++++++
 4 files changed, 516 insertions(+)
 create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c

-- 
2.48.1