Re: [PATCH v2] dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format

[Vladimir Zapolskiy]

Hello Leonardo,

thank you so much for working on this.

On 2/26/25 03:09, Leonardo Felipe Takao Hirata wrote:
> Convert NXP LPC3220-MIC to DT schema.
>
> Signed-off-by: Leonardo Felipe Takao Hirata <leo.fthirata@xxxxxxxxx>
> ---
> Changes in v2:
>   - Fix SoB
>   - Remove reg description
>   - List #interrupt-cell items
>   - Add interrupt restriction per variant
>   - Remove extra examples
> ---
>   .../interrupt-controller/nxp,lpc3220-mic.txt  | 58 --------------
>   .../interrupt-controller/nxp,lpc3220-mic.yaml | 80 +++++++++++++++++++
>   2 files changed, 80 insertions(+), 58 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
>   create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml

<snip>

> diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml
> new file mode 100644
> index 000000000000..489bd329bc4e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/nxp,lpc3220-mic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
> +
> +maintainers:
> +  - Vladimir Zapolskiy <vz@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,lpc3220-mic
> +      - nxp,lpc3220-sic
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  interrupts:
> +    items:
> +      - description:
> +          IRQ number.

For sake of better understanding SIC1 and SIC2 interrupt controllers
are chained to MIC, that's why there is 'interrupts' property present,
and here 0/1 interrupt values are for regular IRQ, 30/31 are for fast IRQ.

Also please add here

  minItems: 2
  maxItems: 2

I believe that the 'interrupts' property can be just left without any
given description, or just give a simple description like

  IRQ and FIQ outputs of sub interrupt controllers to the main interrupt controller

> +      - description: |
> +          IRQ type. Can be one of:
> +
> +              IRQ_TYPE_EDGE_RISING = Low-to-high edge triggered,
> +              IRQ_TYPE_EDGE_FALLING = High-to-low edge triggered,
> +              IRQ_TYPE_LEVEL_HIGH = Active high level-sensitive,
> +              IRQ_TYPE_LEVEL_LOW = Active low level-sensitive.
> +
> +          Reset value is IRQ_TYPE_LEVEL_LOW.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: nxp,lpc3220-sic
> +    then:
> +      required:
> +        - interrupts
> +    else:
> +      properties:
> +        interrupts: false

Please check if this 'else' condition can be removed.

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    mic: interrupt-controller@40008000 {
> +      compatible = "nxp,lpc3220-mic";
> +      reg = <0x40008000 0x4000>;
> +      interrupt-controller;
> +      #interrupt-cells = <2>;
> +    };
> +
> +    sic1: interrupt-controller@4000c000 {
> +      compatible = "nxp,lpc3220-sic";
> +      reg = <0x4000c000 0x4000>;
> +      interrupt-controller;
> +      #interrupt-cells = <2>;
> +      interrupt-parent = <&mic>;
> +      interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
> +                  <30 IRQ_TYPE_LEVEL_LOW>;
> +    };

--
Best wishes,
Vladimir