Re: [PATCH v3 01/17] media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/V2H(P) SoC

[Geert Uytterhoeven]

Hi Tommaso,

On Wed, 26 Feb 2025 at 16:25, Tommaso Merciai
<tommaso.merciai.xr@xxxxxxxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> found on the Renesas RZ/G2L SoC, with the following differences:
> - A different D-PHY
> - Additional registers for the MIPI CSI-2 link
> - Only two clocks
>
> Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> SoC.
>
> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml

> @@ -48,7 +58,8 @@ properties:
>    resets:
>      items:
>        - description: CRU_PRESETN reset terminal
> -      - description: CRU_CMN_RSTB reset terminal
> +      - description:
> +          CRU_CMN_RSTB reset terminal (all but RZ/V2H(P)) or D-PHY reset (RZ/V2H(P))

According to the flowcharts[1] in the RZ/G2L, RZ/V2L, and RZ/G2UL
documentation, CPG_RST_CRU.CRU_CMN_RSTB is the D-PHY reset on all of
them, so I think you can just write "D-PHY reset".
Or "D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)"?

[1] Section 35. Camera Data Receiving Unit (CRU)
    35.3.1 Starting Reception for the MIPI CSI-2 Input
    35.3.2.2Stopping the D-PHY (MIPI CSI-2 Input)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds