Re: [PATCH] i2c: amd-isp: Add ISP i2c-designware driver

From: Christophe JAILLET
Date: Sat Mar 01 2025 - 03:41:59 EST


Le 28/02/2025 à 17:45, Pratap Nirujogi a écrit :
The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.

Signed-off-by: Pratap Nirujogi <pratap.nirujogi@xxxxxxx>

...

diff --git a/drivers/i2c/busses/i2c-designware-amdisp.c b/drivers/i2c/busses/i2c-designware-amdisp.c
new file mode 100644
index 000000000000..dc90510a440b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-amdisp.c
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: MIT */

I think that this should be // comment style for SPDX-License-Identifier en c files.

+/*
+ * Copyright 2024-2025 Advanced Micro Devices, Inc.
+ *

...

+static int amd_isp_dw_i2c_plat_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adap;
+ struct amd_isp_i2c_dev *isp_i2c_dev;
+ struct dw_i2c_dev *dev;
+ int ret;
+
+ isp_i2c_dev = devm_kzalloc(&pdev->dev, sizeof(struct amd_isp_i2c_dev),

sizeof(*isp_i2c_dev) maybe?

+ GFP_KERNEL);
+ if (!isp_i2c_dev)
+ return -ENOMEM;
+
+ dev = &isp_i2c_dev->dw_dev;
+ dev->dev = &pdev->dev;
+
+ /**

Just /*

+ * Use the polling mode to send/receive the data, because
+ * no IRQ connection from ISP I2C
+ */
+ dev->flags |= ACCESS_POLLING;
+ platform_set_drvdata(pdev, dev);
+
+ dev->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(dev->base))
+ return PTR_ERR(dev->base);
+
+ ret = isp_power_set(true);
+ if (ret) {
+ dev_err(dev->dev, "unable to turn on the amdisp i2c power:%d\n", ret);

return dev_err_probe() would make code slightly simpler.

+ return ret;
+ }
+
+ dev->get_clk_rate_khz = amd_isp_dw_i2c_get_clk_rate;
+ ret = i2c_dw_fw_parse_and_configure(dev);
+ if (ret)
+ goto exit;
+
+ i2c_dw_configure(dev);
+
+ adap = &dev->adapter;
+ adap->owner = THIS_MODULE;
+ ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+ adap->dev.of_node = pdev->dev.of_node;
+ /* arbitrary large number to avoid any conflicts */
+ adap->nr = 99;
+
+ if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
+ dev_pm_set_driver_flags(&pdev->dev,
+ DPM_FLAG_SMART_PREPARE);
+ } else {
+ dev_pm_set_driver_flags(&pdev->dev,
+ DPM_FLAG_SMART_PREPARE |
+ DPM_FLAG_SMART_SUSPEND);
+ }

Unneeded { } in both branches.

+
+ device_enable_async_suspend(&pdev->dev);
+
+ /* The code below assumes runtime PM to be disabled. */
+ WARN_ON(pm_runtime_enabled(&pdev->dev));
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+
+ if (dev->shared_with_punit)
+ pm_runtime_get_noresume(&pdev->dev);
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = i2c_dw_probe(dev);
+ if (ret) {
+ dev_err(dev->dev, "i2c_dw_probe failed %d\n", ret);

dev_err_probe() would make code slightly simpler.

+ goto exit_probe;
+ }
+
+ isp_power_set(false);
+ return ret;
+
+exit_probe:
+ amd_isp_dw_i2c_plat_pm_cleanup(dev);
+ isp_power_set(false);
+exit:
+ isp_power_set(false);
+ return ret;
+}
+
+static void amd_isp_dw_i2c_plat_remove(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ i2c_del_adapter(&dev->adapter);
+
+ i2c_dw_disable(dev);
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
+ amd_isp_dw_i2c_plat_pm_cleanup(dev);
+
+ reset_control_assert(dev->rst);

Is it needed? (there is apparently no reset_control_deassert() in this driver)

+}

...

+MODULE_AUTHOR("Venkata Narendra Kumar Gutta <vengutta@xxxxxxx>");
+MODULE_AUTHOR("Pratap Nirujogi <pratap.nirujogi@xxxxxxx>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter in AMD ISP");
+MODULE_LICENSE("GPL");

MIT is stated in SPDX-License-Identifier

+MODULE_IMPORT_NS("I2C_DW");
+MODULE_IMPORT_NS("I2C_DW_COMMON");
+MODULE_LICENSE("GPL and additional rights");

Is it allowed to have several MODULE_LICENSE?

...

CJ