[RFC] staging: iio: ad9832: Use devm_regulator_get_enable_read_voltage()

[Saalim Quadri]

Use devm_regulator_get_enable_read_voltage() to reduce boiler plate
code.

* Here I am particularly confused about regulator_enable(), part where I should
  use devm_regulator_get_enable() to enable avdd supply?
* I can resend this as a patch if everything is alright, specifically with
  devm_regulator_get_enable() for dvdd

Signed-off-by: Saalim Quadri <danascape@xxxxxxxxx>
---
 drivers/staging/iio/frequency/ad9832.c | 37 +++-----------------------
 1 file changed, 4 insertions(+), 33 deletions(-)

diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index 140ee4f9c137..9e7975265454 100644
--- a/drivers/staging/iio/frequency/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -74,8 +74,6 @@
 /**
  * struct ad9832_state - driver instance specific data
  * @spi:		spi_device
- * @avdd:		supply regulator for the analog section
- * @dvdd:		supply regulator for the digital section
  * @mclk:		external master clock
  * @ctrl_fp:		cached frequency/phase control word
  * @ctrl_ss:		cached sync/selsrc control word
@@ -94,8 +92,6 @@
 
 struct ad9832_state {
 	struct spi_device		*spi;
-	struct regulator		*avdd;
-	struct regulator		*dvdd;
 	struct clk			*mclk;
 	unsigned short			ctrl_fp;
 	unsigned short			ctrl_ss;
@@ -297,11 +293,6 @@ static const struct iio_info ad9832_info = {
 	.attrs = &ad9832_attribute_group,
 };
 
-static void ad9832_reg_disable(void *reg)
-{
-	regulator_disable(reg);
-}
-
 static int ad9832_probe(struct spi_device *spi)
 {
 	struct ad9832_platform_data *pdata = dev_get_platdata(&spi->dev);
@@ -320,33 +311,13 @@ static int ad9832_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
-	st->avdd = devm_regulator_get(&spi->dev, "avdd");
-	if (IS_ERR(st->avdd))
-		return PTR_ERR(st->avdd);
-
-	ret = regulator_enable(st->avdd);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to enable specified AVDD supply\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(&spi->dev, ad9832_reg_disable, st->avdd);
+	ret = devm_regulator_get_enable_read_voltage(&spi->dev, "avdd");
 	if (ret)
-		return ret;
-
-	st->dvdd = devm_regulator_get(&spi->dev, "dvdd");
-	if (IS_ERR(st->dvdd))
-		return PTR_ERR(st->dvdd);
+			return dev_err_probe(&spi->dev, ret, "failed to get AVDD voltage\n");
 
-	ret = regulator_enable(st->dvdd);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to enable specified DVDD supply\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(&spi->dev, ad9832_reg_disable, st->dvdd);
+	ret = devm_regulator_get_enable(&spi->dev, "dvdd");
 	if (ret)
-		return ret;
+			return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVDD supply\n");
 
 	st->mclk = devm_clk_get_enabled(&spi->dev, "mclk");
 	if (IS_ERR(st->mclk))
-- 
2.34.1