[PATCH v2 1/7] media: dt-bindings: mt9m114: Add pad-slew-rate DT-binding

[Mathis Foerst]

The MT9M114 supports the different slew rates (0 to 7) on the output pads.
At the moment, this is hardcoded to 7 (the fastest rate).
The user might want to change this values due to EMC requirements.

Add the 'pad-slew-rate' property to the MT9M114 DT-bindings for selecting
the desired slew rate.

Signed-off-by: Mathis Foerst <mathis.foerst@xxxxxx>
---
 .../devicetree/bindings/media/i2c/onnn,mt9m114.yaml      | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
index f6b87892068a..c184bc04b743 100644
--- a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
@@ -70,6 +70,15 @@ properties:
           - bus-type
           - link-frequencies
 
+  onnn,slew-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and
+      PIXCLK. Higher values imply steeper voltage-flanks on the pads.
+    minimum: 0
+    maximum: 7
+    default: 7
+
 required:
   - compatible
   - reg
-- 
2.34.1