[PATCH RFC NOT TESTED 2/2] PCI: artpec6: Use use_parent_dt_ranges and clean up artpec6_pcie_cpu_addr_fixup()

[Frank Li]

Remove artpec6_pcie_cpu_addr_fixup() as the DT bus fabric should provide correct
address translation. Set use_parent_dt_ranges to allow the DWC core driver to
fetch address translation from the device tree.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 drivers/pci/controller/dwc/pcie-artpec6.c | 20 ++------------------
 1 file changed, 2 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
index 234c8cbcae3af..d2a628a0fdc17 100644
--- a/drivers/pci/controller/dwc/pcie-artpec6.c
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -94,23 +94,6 @@ static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u
 	regmap_write(artpec6_pcie->regmap, offset, val);
 }
 
-static u64 artpec6_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 cpu_addr)
-{
-	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
-	struct dw_pcie_rp *pp = &pci->pp;
-	struct dw_pcie_ep *ep = &pci->ep;
-
-	switch (artpec6_pcie->mode) {
-	case DW_PCIE_RC_TYPE:
-		return cpu_addr - pp->cfg0_base;
-	case DW_PCIE_EP_TYPE:
-		return cpu_addr - ep->phys_base;
-	default:
-		dev_err(pci->dev, "UNKNOWN device type\n");
-	}
-	return cpu_addr;
-}
-
 static int artpec6_pcie_establish_link(struct dw_pcie *pci)
 {
 	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
@@ -134,7 +117,6 @@ static void artpec6_pcie_stop_link(struct dw_pcie *pci)
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
-	.cpu_addr_fixup = artpec6_pcie_cpu_addr_fixup,
 	.start_link = artpec6_pcie_establish_link,
 	.stop_link = artpec6_pcie_stop_link,
 };
@@ -433,6 +415,8 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, artpec6_pcie);
 
+	pci->use_parent_dt_ranges = true;
+
 	switch (artpec6_pcie->mode) {
 	case DW_PCIE_RC_TYPE:
 		if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_HOST))

-- 
2.34.1