[PATCH v2 2/4] arm64: dts: rockchip: Add user button to Radxa E20C

[Jonas Karlman]

Radxa E20C has two buttons, one SARADC maskrom button and one GPIO user
button.

Add support for the user button using a gpio-keys node.

Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
v2: No change
---
 .../boot/dts/rockchip/rk3528-radxa-e20c.dts   | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index 7f0237206405..b378774d2a4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include "rk3528.dtsi"
 
@@ -18,6 +19,19 @@ chosen {
 		stdout-path = "serial0:1500000n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_key>;
+
+		button-user {
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "USER";
+			linux,code = <BTN_1>;
+			wakeup-source;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -50,6 +64,12 @@ led-wan {
 };
 
 &pinctrl {
+	gpio-keys {
+		user_key: user-key {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	leds {
 		lan_led_g: lan-led-g {
 			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
2.48.1