[PATCH v2 2/2] media: i2c: imx219: Enable runtime PM autosuspend

[Tarang Raval]

Use pm_runtime_put_autosuspend() instead of pm_runtime_put()
to allow autosuspend. Set a 1000ms autosuspend delay in
imx219_probe() to improve power efficiency.

Signed-off-by: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx>
---
 drivers/media/i2c/imx219.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 75d3123d47b4..5e134c9029cb 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -775,7 +775,8 @@ static int imx219_enable_streams(struct v4l2_subdev *sd,
 	return 0;
 
 err_rpm_put:
-	pm_runtime_put(&client->dev);
+	pm_runtime_mark_last_busy(&client->dev);
+	pm_runtime_put_autosuspend(&client->dev);
 	return ret;
 }
 
@@ -796,7 +797,8 @@ static int imx219_disable_streams(struct v4l2_subdev *sd,
 	if (ret)
 		dev_err(&client->dev, "%s failed to set stream\n", __func__);
 
-	pm_runtime_put(&client->dev);
+	pm_runtime_mark_last_busy(&client->dev);
+	pm_runtime_put_autosuspend(&client->dev);
 
 	return ret;
 }
@@ -1268,6 +1270,8 @@ static int imx219_probe(struct i2c_client *client)
 	}
 
 	pm_runtime_idle(dev);
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
 
 	return 0;
 
-- 
2.34.1