Re: [PATCH v2 11/15] arm64: dts: allwinner: a523: add Avaota-A1 router support

[Jernej Škrabec]

Dne torek, 4. marec 2025 ob 23:23:05 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> The Avaota A1 router board is an Open Source hardware board, designed
> by YuzukiHD. Pine64 produces some boards and sells them. It uses the
> Allwinner A527 or T527 SoC, and comes with the following features:
>   - Eight ARM Cortex-A55 cores, Mali-G57 MC1 GPU
>   - 1GiB/2GiB/4GiB LPDDR4 DRAM
>   - AXP717 + AXP323 PMIC
>   - Raspberry-Pi-2 compatible GPIO header
>   - 1 USB 2.0 type A host port, 1 USB 3.0 type A host post
>   - 1 USB 2.0 type C port (OTG + serial debug)
>   - MicroSD slot
>   - eMMC between 16 and 128 GiB
>   - on-board 16MiB bootable SPI NOR flash
>   - two 1Gbps Ethernet ports (via RTL8211F PHYs)
>   - HDMI port
>   - DP port
>   - camera and LCD connectors
>   - 3.5mm headphone jack
>   - (yet) unsupported WiFi/BT chip
>   - 1.3" LC display, connected via SPI
>   - 12 V barrel plug for power supply
> 
> Add the devicetree file describing the currently supported features.
> 
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>

Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>

Best regards,
Jernej