Re: [PATCH V2] usb: chipidea: udc: Add revision check of 2.20[CI_REVISION_22]

[Michal Simek]

+ Radhey.

On 3/6/25 15:12, Junzhong Pan wrote:
> Hi Piyush,
>
> > Issue: Adding a dTD to a Primed Endpoint May Not Get Recognized with
> > revision 2.20a.
> >
> > There is an issue with the add dTD tripwire semaphore (ATDTW bit in
> > USBCMD register) that can cause the controller to ignore a dTD that is
> > added to a primed endpoint. When this happens, the software can read
> > the tripwire bit and the status bit at '1' even though the endpoint is
> > unprimed.
> > This issue observed with the Windows host machine.
>
> Sorry to dig through this old patch email.
>
> May I ask what does **the scene look like (bus condition/dtd status)**
> when this issue observed with the Windows host machine occurs?
>
> I want to know if it's relevant to an issue I encountered recently.
>
> I met this a tricky issue with an soc have a marvel udc (driven by
> mv_udc_core.c, it's a same chipidea IP accordingly) when running rndis
> gadget with the Windows host machine.
>
> When the rndis gadget running for a long time (randomly), the udc would
> suddenly stopped and no longger response to IN token sent from the host.
>
> The bus trace looks like this:
>
> BULK IN:
> 	IN
> 	DATA0 120 Bytes
> 	ACK
> BULK OUT:
> 	OUT
> 	DATA1 98 Bytes
> 	NYET
> BULK IN	??
> 	IN NAK
> 	IN NAK
> 	IN NAK
> 	.....
> 	IN !!Propagated Error!!(Turnaround/Timeout Error)
>
>
>
> The driver doesn't receive any further interrupts when it stopped,
> though the IN 102 Bytes transaction is finished on the bus, but the
> TD_TOTAL_BYTES of that dTd is never updated.
>
>   ep num: 1 dir: 1(in)
>    qh of current ep: 1 dir: 1(in)
>      qh maxpacklen: 0x22000000, token: 0x668080
>      qh td_dma curr_dtd_ptr: 0x658403c0, next_dtd_ptr: 0x1
>      qh buf p0: 0x672dcde, p1: 0x672e378, p2: 0x672f000, p3: 0x6730000, p4: 0x6731000
>    req 0xd81e245540 len: **102**, first_dtd: 0x658403c0, last_dtd: 0x658403c0, dtd_count: 1, actual: 102
>       [qh->curr_dtd_ptr]dtd dma 0x658403c0, token: 0x668080, err: 0x0, dtd_nxt: 0x65840540
>           buf p0:0x672dcde p1:0x672e000 p2:0x672f000 p3:0x6730000 p4:0x6731000 scr: 0x0
>    req 0xd81e245b40 len: 1558, first_dtd: 0x65840540, last_dtd: 0x65840540, dtd_count: 1, actual: 1558
>       [---]dtd dma 0x65840540, token: 0x6168080, err: 0x0, dtd_nxt: 0x65840080
>           buf p0:0x20ce50de p1:0x20ce6000 p2:0x20ce7000 p3:0x20ce8000 p4:0x20ce9000 scr: 0x0
> ......
>
> epnak: 0x00070003
> epsetupstat: 0x00000000
> epprime: 0x00000000
> epflush: 0x00000000
> epstatus: 0x00020002

Piyush is no longer with us but Radhey will take care about this.

Thanks,
Michal