Re: [PATCH v4 17/17] iio: adc: ad7768-1: add low pass -3dB cutoff attribute

From: Marcelo Schmitt
Date: Fri Mar 07 2025 - 10:15:36 EST


Looks good. Minor comment inline.

On 03/06, Jonathan Santos wrote:
> Ad7768-1 has a different -3db frequency multiplier depending on
> the filter type configured. The cutoff frequency also varies according
> to the current ODR.
>
> Add a readonly low pass -3dB frequency cutoff attribute to clarify to
> the user which bandwidth is being allowed depending on the filter
> configurations.
>
> Signed-off-by: Jonathan Santos <Jonathan.Santos@xxxxxxxxxx>
> ---

Reviewed-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>

> v4 Changes:
> * None
>
> v3 Changes:
> * None
>
> v2 Changes:
> * New patch in v2.
> ---
> drivers/iio/adc/ad7768-1.c | 22 ++++++++++++++++++++--
> 1 file changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
> index 664d0b535340..9ba00e9089bd 100644
> --- a/drivers/iio/adc/ad7768-1.c
> +++ b/drivers/iio/adc/ad7768-1.c
> @@ -150,6 +150,17 @@ enum ad7768_scan_type {
> AD7768_SCAN_TYPE_HIGH_SPEED,
> };
>
> +/*
> + * -3dB cutoff frequency multipliers (relative to ODR) for
> + * each filter type. Values are multiplied by 1000.
> + */
> +static const int ad7768_filter_3db_odr_multiplier[] = {
> + [AD7768_FILTER_SINC5] = 204,
> + [AD7768_FILTER_SINC3] = 261,
> + [AD7768_FILTER_SINC3_REJ60] = 261,

Are these constants from ADAQ7768-1 datasheet?
There it says "the sinc3 filter has a −3 dB bandwidth of 0.2617 × ODR."
If so, maybe use 262 as SINC3 multiplier?

> + [AD7768_FILTER_WIDEBAND] = 433,
> +};
> +
> static const int ad7768_mclk_div_rates[4] = {
> 16, 8, 4, 2,
> };
> @@ -228,7 +239,8 @@ static const struct iio_chan_spec ad7768_channels[] = {
> .type = IIO_VOLTAGE,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> - BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
> + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
> .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> @@ -762,7 +774,7 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
> {
> struct ad7768_state *st = iio_priv(indio_dev);
> const struct iio_scan_type *scan_type;
> - int scale_uv, ret;
> + int scale_uv, ret, temp;
>
> scan_type = iio_get_current_scan_type(indio_dev, chan);
> if (IS_ERR(scan_type))
> @@ -802,6 +814,12 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
> case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> *val = st->oversampling_ratio;
>
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
> + temp = st->samp_freq * ad7768_filter_3db_odr_multiplier[st->filter_type];
> + *val = DIV_ROUND_CLOSEST(temp, 1000);
> +
> return IIO_VAL_INT;
> }
>
> --
> 2.34.1
>