[PATCH RESEND 4/4] media: i2c: imx214: Add support for 23.88MHz clock

[André Apitzsch via B4 Relay]

From: André Apitzsch <git@xxxxxxxxxxx>

Qualcomm MSM8916 devices only provide an external clock of 23.88MHz.
Make the sensor usable by those devices by adding support for this
frequency.

Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
 drivers/media/i2c/imx214.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index c3d55259d6fd1c4ca96f52833864bdfe6bedf13a..e24c76e01ab5070c073d082b1a2969cff3e17f9f 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -30,7 +30,10 @@
 
 #define IMX214_REG_FAST_STANDBY_CTRL	CCI_REG8(0x0106)
 
+#define IMX214_CLK_FREQ_23880KHZ	23880000
 #define IMX214_CLK_FREQ_24000KHZ	24000000
+
+#define IMX214_LINK_FREQ_597MHZ		597000000
 #define IMX214_LINK_FREQ_600MHZ		600000000
 /* Keep wrong link frequency for backward compatibility */
 #define IMX214_DEFAULT_LINK_FREQ_LEGACY	480000000
@@ -233,6 +236,7 @@ static const char * const imx214_supply_name[] = {
 #define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
 
 static const s64 link_freq[] = {
+	IMX214_LINK_FREQ_597MHZ,
 	IMX214_LINK_FREQ_600MHZ,
 };
 
@@ -242,6 +246,10 @@ struct imx214_clk_params {
 };
 
 static const struct imx214_clk_params imx214_clk_params[] = {
+	{
+		.clk_freq = IMX214_CLK_FREQ_23880KHZ,
+		.link_freq = IMX214_LINK_FREQ_597MHZ,
+	},
 	{
 		.clk_freq = IMX214_CLK_FREQ_24000KHZ,
 		.link_freq = IMX214_LINK_FREQ_600MHZ,
@@ -1320,8 +1328,7 @@ static int imx214_parse_fwnode(struct device *dev, struct imx214 *imx214)
 
 	if (i == bus_cfg.nr_of_link_frequencies)
 		ret = dev_err_probe(dev, -EINVAL,
-				    "link-frequencies %d not supported, please review your DT\n",
-				    IMX214_LINK_FREQ_600MHZ);
+				    "provided link-frequencies not supported, please review your DT\n");
 
 done:
 	v4l2_fwnode_endpoint_free(&bus_cfg);
@@ -1359,6 +1366,7 @@ static int imx214_probe(struct i2c_client *client)
 	}
 
 	switch (xclk_freq) {
+	case IMX214_CLK_FREQ_23880KHZ:
 	case IMX214_CLK_FREQ_24000KHZ:
 		if (imx214->clk_params->clk_freq != xclk_freq)
 			return dev_err_probe(imx214->dev, -EINVAL,

-- 
2.48.1