[PATCH v2 5/5] net: stmmac: dwmac-rk: Add initial support for RK3528 integrated PHY

[Jonas Karlman]

Rockchip RK3528 (and RV1106) has a different integrated PHY compared to
the integrated PHY on RK3228/RK3328. Current powerup/down operation is
not compatible with the integrated PHY found in these newer SoCs.

Add operations to powerup/down the integrated PHY found in RK3528.
Use helpers that can be used by other GMAC variants in the future.

Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
---
Changes in v2:
- New patch

This is enough to power up the integrated PHY on RK3528 for MDIO/MII.
However, a PHY driver is still missing and I do not have any RK3528
board that make use of this MAC and PHY, so something that can be
improved upon in the future.
---
 .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 3f096b3ccee8..ab2c872d33e0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -134,6 +134,35 @@ static void rk_gmac_integrated_ephy_powerdown(struct rk_priv_data *priv)
 		reset_control_assert(priv->phy_reset);
 }
 
+#define RK_FEPHY_SHUTDOWN		GRF_BIT(1)
+#define RK_FEPHY_POWERUP		GRF_CLR_BIT(1)
+#define RK_FEPHY_INTERNAL_RMII_SEL	GRF_BIT(6)
+#define RK_FEPHY_24M_CLK_SEL		(GRF_BIT(8) | GRF_BIT(9))
+#define RK_FEPHY_PHY_ID			GRF_BIT(11)
+
+static void rk_gmac_integrated_fephy_powerup(struct rk_priv_data *priv,
+					     unsigned int reg)
+{
+	reset_control_assert(priv->phy_reset);
+	usleep_range(20, 30);
+
+	regmap_write(priv->grf, reg,
+		     RK_FEPHY_POWERUP |
+		     RK_FEPHY_INTERNAL_RMII_SEL |
+		     RK_FEPHY_24M_CLK_SEL |
+		     RK_FEPHY_PHY_ID);
+	usleep_range(10000, 12000);
+
+	reset_control_deassert(priv->phy_reset);
+	usleep_range(50000, 60000);
+}
+
+static void rk_gmac_integrated_fephy_powerdown(struct rk_priv_data *priv,
+					       unsigned int reg)
+{
+	regmap_write(priv->grf, reg, RK_FEPHY_SHUTDOWN);
+}
+
 #define PX30_GRF_GMAC_CON1		0x0904
 
 /* PX30_GRF_GMAC_CON1 */
@@ -993,12 +1022,24 @@ static void rk3528_set_clock_selection(struct rk_priv_data *bsp_priv,
 	}
 }
 
+static void rk3528_integrated_phy_powerup(struct rk_priv_data *bsp_priv)
+{
+	rk_gmac_integrated_fephy_powerup(bsp_priv, RK3528_VO_GRF_MACPHY_CON0);
+}
+
+static void rk3528_integrated_phy_powerdown(struct rk_priv_data *bsp_priv)
+{
+	rk_gmac_integrated_fephy_powerdown(bsp_priv, RK3528_VO_GRF_MACPHY_CON0);
+}
+
 static const struct rk_gmac_ops rk3528_ops = {
 	.set_to_rgmii = rk3528_set_to_rgmii,
 	.set_to_rmii = rk3528_set_to_rmii,
 	.set_rgmii_speed = rk3528_set_rgmii_speed,
 	.set_rmii_speed = rk3528_set_rmii_speed,
 	.set_clock_selection = rk3528_set_clock_selection,
+	.integrated_phy_powerup = rk3528_integrated_phy_powerup,
+	.integrated_phy_powerdown = rk3528_integrated_phy_powerdown,
 	.regs_valid = true,
 	.regs = {
 		0xffbd0000, /* gmac0 */
-- 
2.48.1